Electronics

LINEMASTER - A TRUSTED NAME AND PARTNER TO HIGH TECH.
For over 50 years electronic experts have depended on the performance of LINEMASTER switches because they meet their demands and expectations with complete reliability and confidence. LINEMASTER designs and manufactures one of the most extensive product lines, with over 200 models used worldwide in medical, industrial and commercial applications - with turnkey custom variations a specialty.
Many of LINEMASTER's switches are UL, CSA, TUV certified and CE Marked. LINEMASTER's Research & Development is currently developing a cordless foot switch that utilizes infared technology. This cutting-edge technology will offer new flexibility in design and use for our demanding audience worldwide.

Aquiline [Top]
Attractive housing is molded of corrosion-proof and rustproof, reinforced polymeric material for rugged duty. Offered in single and multiple-pedal variations, and various standard colors. Custom colors and modifications available on special order. Full and twin guards as well as accessory base units available for configurations using multiple switches. Available in waterproof version that meets IEC 60601-2-2 & EN 60529 Degree of Protection IP68 and custom color matching. [Product Information]

Treadlite II [Top]
The handsome steel housing, painted black or stainless steel, is equipped with nonskid base pad and foot treadle pad. The low profile and light pressure required to operate reduces operator fatigue. The Maintained Contact version incorporates a positive, over-center, rocker-type action. Available in single or multiple-pedal variations. Standard model is a formed steel housing or the waterproof version, meets EN 60529 Degree of Protection IP68, with stainless steel housing. [Product Information]

Compact [Top]
The Compact model is available in momentary or maintained action and with or without a cordset. We also offer a variation that has a mounting plate spot-welded to the base for easy mounting. The single models will mount in our full guard 522-B14 or over-sized guard 522-F28. [Product Information]

Deluxe II [Top]
The Deluxe II is a multi-pedal foot switch that should be considered when function, good looks and economy are required. It incorporates a unique building block approach that allows the use of upto four basic SPDT snap switches. The cover is molded in medium gray high-impact compound and tapers close to the floor in the front with a full five inches between the side treadle bars. The side treadle bars and base are die cast metal with nonskid feet.
SPECIAL VARIATIONS are available to the O.E.M. Special modifications include custom cordsets, nameplates, two stage operation, non operative cover, special circuits and a special translucent molded vinyl cover for added environmental protection against limited amounts of water and dirt. [Product Information]

Classic Reed [Top]
The Classic Reed model utilizes a reed switch operated by a magnet for low power applications. The Classic can also be mounted in the full or oversized single guards. [Product Information]

Classic Solid State [Top] SPECIAL ORDER ONLY!
The Classic Solid State foot switch uses a sealed Hall Effect switching element that provides no contact bounce and logic level switching. The Classic housing is a cast aluminum material and can be mounted in our full and oversized single guards. [Product Information]

Classic II [Top]
Available as a single or two-pedal model, with or without a full guard. All Classic III variations have cast aluminum construction with nonskid base and meets EN 60529 Degree of Protection IP56 requirements. [Product Information]

Copyright © 1997 Linemaster Switch Corporation
Trademark/Legal Notice