|
|
|
|---|---|---|
| Home | About | Products | Catalog | Int'l Distributors | Glossary | Support | Representative | ISO-9001 | Literature | Press | Shows | Directions | Contact | ||
|
HERCULES |
Environmental Ratings:NEMA Type 1, 2, 4 & 13 Key BenefitsThis foot switch is designed for use with variable speed
motor drives and is available in selected 2 watt linear values. Specify
the maximum resistance you want. Depressing the treadle rotates the potentiometer
from zero to the selected maximum resistance shown below. By wiring to
the third terminal it goes from the maximum resistance to zero. The treadle
is spring loaded and returns to the normal position when the foot pressure
is removed. A SPDT auxiliary switch contact rated at 15 Amps 125-250 VAC
can be added to the control. The auxiliary switch will operate at the beginning
of the treadle stroke. On special order, up to 3 SPDT switches can be
added and adjusted for operation at any point of the treadle stroke. Details
on switch size, weight, full shields and construction are the same as
for the Hercules foot switches. Size: |
|
|
| SPECIFICATIONS (Special variations are available to the O.E.M. on special order on the models listed below) |
|
||
| CATALOG NUMBER* |
ACTION | DESCRIPTION | |
 |
500-H-xxxx | Momentary | Full Shield |
 |
500-AH-xxxx | Momentary | Full Shield-Auxiliary Contact |
|
500-A2H-xxxx | Momentary | Full Shield - 2 Auxiliary Contacts |
|
500-A3H-xxxx | Momentary | Full Shield - 3 Auxiliary Contacts |
|
500-N-xxxx | Momentary | No Guard |
|
500-AN-xxxx | Momentary | No Guard-Auxiliary Contact |
|
500-HO-xxxx | Momentary | "O" Shield |
|
500-AHO-xxxx | Momentary | "O" Shield-Auxiliary Contact |
|
500-AHOX | Momentary | OX Shield-Auxiliary Contact |
* When ordering, please add the potentiometer value (in Ohms) as a suffix(-xxx) to the Foot Switch
catalog number.Example:
A 500-H-250 indicates a 500-H model with a 250 Ohm potentiometer
A 500-H-2.5K indicates a 500-H model with a 2,500 Ohm potentiometer
A 500-H-5K indicates a 500-H model with a 5,000 Ohm potentiometer
A 500-H-1M indicates a 500-H model with a 1 MegOhm potentiometerThe 5K and 10K potentiometers are standard; please contact customer service for pricing
and availability for all other potentiometer values.
 |
| Home | About | Products | Catalog | Int'l Distributors | Glossary | Support | Representative | ISO-9001 | Literature | Press | Shows | Directions | Contact |
LINEMASTER Switch Corporation · 29 Plaine Hill Road · POB 238 · Woodstock, CT 06281-0238 · USA Tel: 860.974.1000 Fax: 860.974.0691 or Toll-Free Fax 800.974.3668 (USA Only) |
Copyright © 1997 Linemaster Switch Corporation |
