Cord Information Specifications by Linemaster Switch Corporation


Home \| About \| Products \| Catalog \| Int'l Distributors \| Glossary \| Support \| Representative \| ISO-9001 \| Literature \| Press \| Shows \| Directions \| Contact

CORD INFORMATION
CORD TYPE	JACKET MATERIAL	AWG SIZE	ELEC. RATING IN AMPERES	UL/CSA DIA. RANGE	APPLICATIONS
300 Volt	SJT-plastic SJO-neoprene SJTO-plastic	#18-2	10	.280-.315	Sound equipment, small motors, tools, medical & dental equipment, office machines, tape recorders, and other small appliances. Widely used on foot switches. SJO (Neoprene) or SJTO (Plastic) cord is used where cord must resist oil, acid, and grease.
		#18-3	10	.300-.335
		#18-4	7	.325-.365
		#16-2	13	.305-.340
		#16-3	13	.325-.360
		#16-4	10	.350-.395

300 Volt	SVT-plastic SVO-neoprene SVTO-plastic	#18-2	10	.220-.255	Office equipment (dictating machines) and other light duty requirements. SVO (Neoprene) or SVTO (Plastic) cord is used where cord must resist oil, acid, and grease.
		#18-3	10	.230-.265
		#18-4	7	.250-.290

600 Volt	ST-plastic SO-neoprene STO-plastic	#18-2	10	.340-.382	Heavy duty service when subjected to extra hard usage, heavy tools, medical & dental equipment, and other heavy duty applications. SO (Neoprene) or STO (Plastic) cord is used where cord must resist oil, acid, and grease. Note: ST (Plastic) cord is slightly smaller in diameter than SO (Neoprene) or S (Rubber) cord.
		#18-3	10	.360-.400
		#18-4	7	.385-.430
		#16-2	13	.365-.410
		#16-3	13	.385-.430
		#16-4	10	.410-.460
		#14-2	18	.495-.550
		#14-3	18	.520-.575
		#14-4	15	.560-.620

LINEMASTER Switch Corporation � 29 Plaine Hill Road � POB 238 � Woodstock, CT 06281-0238 � USA
Tel: 860.974.1000 Fax: 860.974.0691 or Toll-Free Fax 800.974.3668 (USA Only)

CORD INFORMATION