|
|
|
|---|---|---|
| Home | About | Products | Catalog | Int'l Distributors | Glossary | Support | Representative | ISO-9001 | Literature | Press | Shows | Directions | Contact | ||
|
CLIPPER |
Environmental Ratings:EN 60529 Degree of Protection IP20 Key BenefitsThe rugged, long life Clipper foot switch models have proved themselves in the field over many years of usage. All maintained models offer "Push On-Push Off" action that insures long trouble-free performance. The wide treadle models offer a large seven inch target for the operator's foot. Cast iron housing. Nonskid base pad. Complete with adjustable strain relief connector. Black finish. Size: 4-1/2" x 3-1/2" x 1-1/2" The CLIPPER TWIN consists of two SPDT or two DPDT foot switches mounted on a heavy steel base plate with nonskid pad. Divider bar between pedals helps prevent accidental operation of both pedals at one time. A tube between the two foot switches conceals all internal wiring between them. A conduit opening with strain relief connector is provided in the right foot switch. Size:8-3/8" x 4-1/2" x 1-1/2" Model 638-S features a cast aluminum housing painted Alert Orange with a splash resistant interior switch.
|
|
| SPECIFICATIONS (Special variations are available to the O.E.M. on special order on the models listed below) |
 |
|||||
| CATALOG NUMBER | ||||||
| REGULAR TREADLE |
WIDE TREADLE |
DESCRIPTION | CIRCUIT | FORM |
ELECTRICAL RATINGS |
|
    |
632-S | 642-S | Momentary | SPDT | C |
20 A 125-250 VAC 1 H.P. 125-250 VAC |
  |
632-SC3* | Momentary | SPST Wired N.O. | A |
15
A 125 VAC 3/4 H.P. 125 VAC |
|
| 632-SC36*** | Momentary | SPDT wired N.O. | A |
10 A 1/2 HP 125-250 VAC | ||
| 632-DC3A* | Maintained | SPDT wired N.O. | A |
15 A 3/4 HP 125 VAC | ||
 |
633-S | 643-S | Momentary | SPDT DB± | Z |
20 A 125-250 VAC 3/4 H.P. 125 VAC 1 H.P. 250 VAC |
  |
635-S | 645-S | Momentary | DPDT | C |
15
A 125 VAC 10 A 250 VAC 1/2 H.P. 125-250 VAC |
 |
636-S | 646-S | Two Stage Momentary |
Each Stage SPDT | C |
15 A 125 VAC 10 A 250 VAC 1/2 H.P. 125-250 VAC |
 |
632-DA | 642-DA | Maintained | SPDT | C |
20
A 125 VAC 10 A 250 VAC 1.5 H.P. 125-240 VAC |
|
634-DA | Maintained | DPDT | C |
10 A 125-250 VAC 1/8 H.P. 125 VAC 1/4 H.P. 250 VAC |
|
|
TWIN 632-S | Momentary | Each Side SPDT | C |
20
A 125-250 VAC 1 H.P. 125-250 VAC |
|
|
TWIN 635-S | Momentary | Each Side DPDT | C |
15 A 125 VAC 10 A 250 VAC 1/2 H.P. 125-250 VAC |
|
|
638-S | Momentary | SPDT | C |
10
A 125-250 VAC 1/2 H.P. 125-250 VAC |
|
|
638-SC38** (IP21) | Momentary | SPST Wired N.O. | A |
10 A 125-250 VAC 1/2 H.P. 125-250 VAC |
|
Model 638-S features a cast aluminum housing painted Alert Orange with
a splash resistant interior switch.
*Supplied with 8 ft. 14/3 cord and 3 prong series plug with green
lead grounded.
**Supplied with 8 ft. 16/3 cord, wired N.O. with green lead grounded.
***Supplied with 6 ft. 18/3 cordset without plug with green
lead grounded.
±DB Double Break models must be wired to equal voltage sources and the same polarity.
The loads should be on the same sides of the line.
BOLD COPY INDICATES STOCK ITEM
 |
| Home | About | Products | Catalog | Int'l Distributors | Glossary | Support | Representative | ISO-9001 | Literature | Press | Shows | Directions | Contact |
LINEMASTER Switch Corporation · 29 Plaine Hill Road · POB 238 · Woodstock, CT 06281-0238 · USA Tel: 860.974.1000 Fax: 860.974.0691 or Toll-Free Fax 800.974.3668 (USA Only) |
Copyright © 1997 Linemaster Switch Corporation |
