CLASSIC REED
FOOTSWITCH

Environmental Ratings:

EN 60529 Degree of Protection IP20

Key Benefits

The Classic Reed foot switch has a cast aluminum housing and treadle, base plate with nonskid base pad and is painted black. The foot switch is momentary contact with a spring return treadle action. Standard models are wired normally open with the green lead (blade #1) grounded.

Size: 5-1/2" x 3-1/4" x 1-3/4"
Weight: 1-1/2 lbs.

THIS IS A LOW POWER DEVICE AND MUST BE USED ONLY IN THOSE APPLICATIONS WHERE SUITABLE DESIGN CONSTRAINTS AND SAFETY PRECAUTIONS ARE MET. CONTACT PROTECTION IS RECOMMENDED IF INDUCTIVE OR HIGH VOLTAGE LOADS ARE SWITCHED. PROPER SNUBBER NETWORKS ARE REQUIRED. HIGH INRUSH CURRENT, DAMAGING TO THE CONTACTS MAY BE PRESENT WHEN SWITCHING TUNGSTEN FILAMENT BULBS OR THROUGH WIRE OF SUFFICIENT LENGTH TO INTRODUCE STORED CAPACITANCE.

Classic Reed Footswitch

Request A Quote